总有机碳在线toc检测仪-环境检测-仪器设备-生物在线
总有机碳在线toc检测仪

总有机碳在线toc检测仪

商家询价

产品名称: 总有机碳在线toc检测仪

英文名称:

产品编号: YJ-9000

产品价格: 0

产品产地: 北京

品牌商标: 中优科技

更新时间: null

使用范围: null

北京中优科技有限公司
  • 联系人 :
  • 地址 : 北京市丰台区造甲街110号
  • 邮编 : 100070
  • 所在区域 : 北京
  • 电话 : 135****9456
  • 传真 : 010-52869521
  • 邮箱 : 757869343@qq.com

在线分析:

Online analysis:

 

 

将TOC分析仪安置于纯水系统,的支管或出水管处,对特定点进行实时、连续、在线监测。在线监测可方便对水系统的质量进行实时测定并对水系统进行实时流程控制,同时可以在第一时间发现水系统的故障。

Put the TOC analyzer in pure water system, the branch or ShuiGuanChu, on a particular point in real time, continuous and online monitoring. On-line monitoring can be convenient for the quality of the water system in real-time measurement and real-time process control for water system, water system of fault can be found in the first place at the same time.

 

 

 

 

 

 

离线分析:

Offline analysis:

 

 

将TOC分析仪放置于实验室操作台上,测试时在系统的各取样点取样后进行分析的方法,其优点是可以使用一台仪器对不同取样点的样品进行检测分析,缺点是会被取样、采样容器以及未受控的环境因数等污染,造成测试结果会与实际样品有偏差。

Placed the TOC analyzer in lab operation stage, all sampling points sampling test in the system after the analysis of the method, its advantage is that you can use one instrument to test the samples of different sampling point analysis, the disadvantage is that will be sampling, sample container and not controlled environment factor, such as pollution caused by test results will have a deviation with actual sample.

 

 

 

 

总有机碳在线toc检测仪可用于检测制药工业中纯化水、注射用水和去离子水中总有机碳的浓度;可以在线监测制药工业的制水系统、半导体工业的超纯水制备系统和晶片工艺过程、电厂去离子水制备过程等,也可用于电厂、科研单位、实验室等超纯水TOC的检测。

Can be used to detect the pharmaceutical industry in the purified water, water for injection, and the concentration of the total organic carbon in deionized water. Can online monitoring system of the pharmaceutical industry water system, the preparation of semiconductor industry, power plants and wafer process deionized water preparation process, etc., can also be used to power plants, scientific research units, such as laboratory ultrapure water TOC inspection.

 

 

总有机碳在线toc检测仪产品特点:

Product features

1.仪器采用便携设计,使用轻便,方便移动至取样点。

1. The instrument USES a portable design, the use of lightweight, convenient to move to sampling points.

2.采用嵌入式系统,触摸屏设计,纯中文操作方便简易。

2. Adopt the embedded system, touch screen design, pure Chinese simple easy to operate.

3.针对制药用水(TOC含量在1000ppb以下)总有机碳含量的检测设计,进行检测。

3. In view of the pharmaceutical water (TOC content under 1000 PPB) total organic carbon content detection is designed, tested.

4.配备大量的储存空间,能够存储大量的测试数据。

4. Equipped with a lot of storage space, can save a lot of testing data.

5.中文打印,输出测试参数、测试结果。

5. Chinese print output test parameters, test results.

6.在使用、贮存和更换过程中不需要气体或试剂,无移动部件,减少维修和维护成本。

6. In the process of use, storage and replace don't need gas or reagent, no moving parts, less maintenance and maintenance costs.

7.当测试样品浓度超过规定限度,仪器能够自动报警,并输出控制信号。

7. When the test sample concentrations in excess of the prescribed limit, the instrument can automatically alarm, and output control signals.

8.符合国家2010版《中国药典》规定的测试方案,

8. In conformity with the 2010 edition of "Chinese pharmacopoeia" provisions of the state of test plan,

 

 

总有机碳在线toc检测仪工作原理:

The working principle of

样品中的有机物在紫外线及二氧化钛广催化的作用下被氧化成二氧化碳,采用电导率检测技术测定二氧化碳,通过电导率传感器检测经氧化反应器氧化后的样品总碳与电导率传感器检测未经氧化反应器氧化的样品总无机碳之差,获得样品中总有机碳含量(TOC=TC-TIC)。

Of organic matter in the sample under the action of uv rays and wide titanium dioxide catalytic oxidized into carbon dioxide, the conductivity detection technology determination of carbon dioxide, by conductivity sensor detection after oxidation reactor oxidation of samples without oxidation reactor and the conductivity sensor of total carbon oxidation of the sample, the difference between the total inorganic carbon for total organic carbon content in the samples (TOC = TC - TIC).

 

 

总有机碳在线toc检测仪技术参数:

Technical parameters:

1、电 源:AC220V±22V

1, the electric source: AC220V plus or minus 22 v

2、频  率:50HZ±1HZ

2, frequency ratio: 50 hz + 1 hz

3、功  率:95W

3, power: 95 w

4、外形尺寸:340*390*145mm

4, appearance size: 340 * 390 * 145 mm

5、重   量:15kg

5, heavy quantity: 15 kg

6、TOC检测范围:0.001mg/l-1.0mg/l

6, the TOC detection range: 0.001 mg/l - 1.0 mg/l

7、检测精度:±5%

7, the detection precision: plus or minus 5%

8、检测时间:≤4min/次

8, test time: 4 min/times or less

9、响应时间:≤15min

9, response time: 15 min or less

10 样品流量:0.5ml/min

10 samples flow: 0.5 ml/min

11 样品温度:1-95℃

The temperature of 11:1-95 ℃

12 环境湿度:≤85%RH

12 environment humidity: 85% RH or less

13 环境温度:10-40℃

13 the environment temperature: 10 to 40 ℃

14 重复误差:≤3%

14 repetitive error: 3% or less

15 线性误差:±5%

15 linear error: plus or minus 5%

 

 

总有机碳在线toc检测仪产品说明:

Product description:

总有机碳(TOC)分析仪采用世界领先的双波长紫外氧化技术,精度高、灵敏度高。高性能CPU,触摸屏智能化控制,具有离线分析和在线分析选配功能,配制外置式打印机,人性化的设计理念,更换UV灯和泵管不用拆开机箱,操作简单、方便,实现了分析仪器国产化。符合《中国药典》2010版附录 VIII R制药用水中总有机碳测定法,满足药典对仪器的要求:①TOC=TC-TIC,②系统适用性试验,③检测灵敏度(等于或小于0.05mg/L)。

Total organic carbon (TOC) analyzer USES the double wavelength ultraviolet oxidation of the world's leading technology, high accuracy, high sensitivity. Intelligent control, high performance CPU, touch screen with offline and online analysis matching function, make external printer, humanized design concept, and the UV lamp replacement pump pipe don't open the case, the operation is simple, convenient, realize the localization of analytical instruments. Conforms to the Chinese pharmacopoeia 2010 edition annex VIII R pharmaceutical method of determination of total organic carbon in the water, to meet the requirements of the pharmacopoeia of the instrument: (1) the TOC = TC - TIC, (2) the system applicability test, (3) the detection sensitivity (equal to or less than 0.05 mg/L).

 

 

售后服务:

After-sales service:

 

 

1、设备保修两年,终身服务,两年内非人为损坏的零部件免费更换,保修期内接到用户邀请后, 最迟响应时间为2小时内,在与用户确认故障后,我公司会在48小时内派工程师到达现场进行免费服务,尽快查清故障所在位置和故障原因,并向用户及时报告故障的原因和排除办法 。

1, two years warranty, life-long service, two years for the damaged parts free replacement, warranty received the invitation from users, the response time of 2 hours at the latest, after confirm with user fault, our company will send engineers arrived on the scene within 48 hours of free services, find out the reason of this fault location and fault as soon as possible and timely report to the users of the cause of the failure and exclusion methods.

2、保修期内人为损坏的零部件按采购(加工)价格收费更换。

2, the warranty period (processed) artificially damaged parts according to the purchasing price charge for replacement.

3、保修期外继续为用户提供优质技术服务,在接到用户维修邀请后3天内派工程师到达用户现场进行维修。并享有优惠购买零配件的待遇。

3, continue to provide users with high-quality technical services, beyond the guarantee period in within 3 days after receiving the user maintenance invited maintenance engineers to the user's site. And enjoys preferential purchase spare parts.

4、传感器过载及整机电路超压损坏不在保修范围内。

4, sensors and the overload circuit overpressure damage is beyond the scope of the warranty.