显微镜物镜加热器,显微镜温度控制器-细胞培养仪器-仪器设备-生物在线
显微镜物镜加热器,显微镜温度控制器

显微镜物镜加热器,显微镜温度控制器

商家询价

产品名称: 显微镜物镜加热器,显微镜温度控制器

英文名称: 显微镜物镜加热器,显微镜温度控制器

产品编号: 显微镜物镜加热器,显微镜温度控

产品价格: 0

产品产地: USA

品牌商标: 玉研科学仪器有限公司

更新时间: 2023-08-17T15:24:17

使用范围: null

上海玉研科学仪器有限公司
  • 联系人 : 方经理
  • 地址 : 上海市闵行区兴梅路485号中环科技园301室
  • 邮编 : 200237
  • 所在区域 : 上海
  • 电话 : 185****9044
  • 传真 : 021-35183767
  • 邮箱 : yuyan0317@126.com

显微镜物镜加热器 OBJECTIVE HEATER 

Features

Temperature controlled heating band
Easy installation around the objective
Fits any objective on the market
Compatible with the following OKOLAB Controllers:
H301-T-UNIT-BL-PLUS
UNO-T-H-PREMIXED
UNO-T-H-CO2
H401-T-CONTROLLER
Compatible with Inverted and Upright Microscopes
Self CalibrationRoutines with BL controllers
Voltage: 24 V
Power: 13 W

 
 
When should I use an Objective Heater
You should use an objective heater, if you:

Perform Oil Immersion Imaging with a Top Stage Incubator
Use dipping lens with an upright Top Stage Incubator
Why should I use an Objective Heater?
Because, if you don't, sample temperature will drop due to oil contact with the cold objective, as shown in the following graph.

 

Step 1: Objective not in contact with Petri 2; Objective Heater Off.

Step 2: Objective in oil contact with Petri 2; Objective Heater Off.

Step 3: Objective in oil contact with Petri 2; Objective Heater on, Offset value 5.3°C.

During the self calibration routine, the offset value of the objective heater is progressively increased, until T2 reaches the desired set point temperature of 37.0°C.

Figure 3 reports the profile of T1, T2, and of Objective Heater Temperature during the experimental campaign described above.



您想了解更多详细资料吗?
请与我们联系:
TEL: 021-35183767 , 18502129044
QQ : 2113136797
Mail: yuyan0317@126.com
  
敬请来电咨询!