人脾成纤维细胞Cell Specification
Fibroblasts are mesenchymal cells derived from the embryonic mesoderm. They have been
extensively used for a wide range of cellular and molecular studies. This is mainly because they
are one of easiest types of cells to grow in culture, and their durability makes them amenable to a
wide variety of manipulations ranging from studies employing gene transfection to
microinjection. Fibroblasts within tissues are exposed to a dynamic mechnical environment,
which influences the structure integrity of both healthy and healing soft tissue. They secrete a
non-rigid extracellular matrix that is rich in type I and/or type III collagen [1]. There is good
evidence that fibroblasts in different parts of the body are intrinsically different and display
different regulatory functions on surrounding cells [2]. For example, splenic fibroblasts have
been shown to regulate the development of NK cells from blood progenitors through an
expression of bioactive IL-15. [3]
HSF from ScienCell Research Laboratories are isolated from human spleen tissue. HSF are
cryopreserved at primary culture and delivered frozen. Each vial contains >5 x 105
Recommended Medium
cells in 1 ml
volume. HSF are characterized by their spindle morphology and immunofluorescent method with
antibody to fibronectin. HSF are negative for HIV-1, HBV, HCV, mycoplasma, bacteria, yeast
and fungi. HSF are guaranteed to further expand for 15 population doublings at the condition
provided by ScienCell Research Laboratories.
It is recommended to use Fibroblast Medium (FM, Cat. No. 2301) for the culturing of HSF in
vitro.
人脾成纤维细胞Product Use
HSF are for research use only
Storage
. It is not approved for human or animal use, or for application in in
vitro diagnostic procedures.
Directly and immediately transfer cells from dry ice to liquid nitrogen upon receiving and keep
the cells in liquid nitrogen until cell culture needed for experiments.
Shipping
Dry ice.
Reference
[1] Gabbiani, G., Rungger-Brandle, E., The fibroblast. In Tissue Repair and Regeneration (L. E. Glynn, ed.), pp 1-
50. Handbook of Inflammation, Vol. 3. Amsterdam, Elsevier, 1981.
[2] Conrad, G. W., Hart, G. W., Chen, Y. (1977) Differences in vitro between fibroblast-like cells from cornea,
heart, and skin of embryonic chicks. J. Cell Sci. 26:119-137.
[3] Briard, D., Brouty-Boyé, D., Azzarone, B., Jasmin, C. (2002) Fibroblasts from human spleen regulate NK cell
differentiation from blood CD34(+) progenitors via cell surface IL-15. J Immunol. 168(9):4326-32
Instruction for culturing cells
Caution: Cryopreserved cells are very delicate. Thaw the vial in a 37o
and return them to culture as quickly as possible with minimal handling!
C waterbath
Set up culture after receiving the order:
1. Prepare a poly-L-lysine coated flask (2 μg/cm2
, T-75 flask is recommended). Add 10 ml
of sterile water to a T-75 flask and then add 15 μl of poly-L-lysine stock solution (10
mg/ml, ScienCell cat. no. 0413). Leave the flask in incubator overnight (minimum one
hour at 37o
2. Prepare complete medium: decontaminate the external surfaces of medium and medium
supplements with 70% ethanol and transfer them to sterile field. Aseptically open each
supplement tube and add them to the basal medium with a pipette. Rinse each tube with
medium to recover the entire volume.
人脾成纤维细胞C incubator).
3. Rinse the poly-L-lysine coated flask with sterile water twice and add 20 ml of complete
medium to the flask. Leave the flask in the hood and go to thaw the cells.
4. Place the vial in a 37o
5. Dispense the contents of the vial into the equilibrated, poly-L-lysine coated culture
vessels. A seeding density of 5,000 cells/cm
C waterbath, hold and rotate the vial gently until the contents are
completely thawed. Remove the vial from the waterbath immediately, wipe it dry, rinse
the vial with 70% ethanol and transfer it to a sterile field. Remove the cap, being careful
not to touch the interior threads with fingers. Using 1 ml eppendorf pipette gently
resuspend the contents of the vial.
2
Note: Dilution and centrifugation of cells after thawing are not recommended since these
actions are more harmful to the cells than the effect of DMSO residue in the culture. It is
also important that cells are plated in poly lysine coated culture vessels that promote
cell attachment.
is recommended.
6. Replace the cap or cover, and gently rock the vessel to distribute the cells evenly. Loosen
cap if necessary to permit gas exchange.
7. Return the culture vessels to the incubator.
8. For best result, do not disturb the culture for at least 16 hours after the culture has been
initiated. Change the growth medium the next day to remove the residual DMSO and
unattached cells, then every other day thereafter.
Maintenance of Culture:
1. Change the medium to fresh supplemented medium the next morning after establishing a
culture from cryopreserved cells.
2. Change the medium every three days thereafter, until the culture is approximately 70%
confluent.
3. Once the culture reaches 70% confluence, change medium every other day until the
culture is approximately 90% confluent.
Subculture:
1. Subculture the cells when they are over 90% confluent.
2. Prepare poly-L-lysine coated flasks (2 μg/cm2
3. Warm medium, trypsin/EDTA solution (T/E, cat. no. 0103), trypsin neutralization
solution (TNS, cat. no. 0113), and DPBS to room temperature. We do not recommend
warming the reagents and medium at 37
) one day before subculture.
o
4. Rinse the cells with DPBS.
C waterbath prior to use.
5. Add 8 ml of DPBS first and then 2 ml of trypsin/EDTA solution into flask (in the case of
T-75 flask); gently rock the flask to make sure cells are covered by trypsin/EDTA
solution; incubate the flask at 37o
人脾成纤维细胞C incubator for 1 to 3 minutes or until cells are
completely rounded up (monitored with inverted microscope). During incubation, prepare
a 50 ml conical centrifuge tube with 5 ml of fetal bovine serum (FBS, cat. no. 0500);
transfer trypsin/EDTA solution from the flask to the 50 ml centrifuge tube (a few percent
of cells may detached); continue incubate the flask at 37o
Note: Use ScienCell Research Laboratories’ trypsin/EDTA solution that is optimized to
minimize the killing of the cells by over trypsinization.
C for 1 minutes (no solution in
the flask at this moment); at the end of trypsinization, one hand hold one side of flask and
the other hand gently tap the other side of the flask to detach cells from attachment; check
the flask under inverted microscope to make sure all cells are detached, add 5 ml of
trypsin neutralization solution to the flask and transfer detached cells to the 50 ml
centrifuge tube; add another 5 ml of TNS to harvest the residue cells and transfer it to the
50 ml centrifuge tube. Examine the flask under inverted microscope to make sure the cell
harvesting is successful by looking at the number of cells left behind. There should be
less than 5%.
6. Centrifuge the 50 ml centrifuge tube (harvested cell suspension) at 1000 rpm (Beckman
Coulter Allegra 6R centrifuge or similar) for 5 min; re-suspend cells in growth medium.
7. Count cells and plate cells in a new, poly-L-lysine coated flask with cell density as
recommended.
Caution: Handling human derived products is potentially biohazardous. Although each cell strain tests negative for
人脾成纤维细胞HIV, HBV and HCV DNA, diagnostic tests are not necessarily 100% accurate, therefore, proper precautions must
be taken to avoid inadvertent exposure. Always wear gloves and safety glasses when working these materials. Never
mouth pipette. We recommend following the universal procedures for handling products of human origin as the
minimum precaution against contamination [1].
[1]. Grizzle, W. E., and Polt, S. S. (1988) Guidelines to avoid personal contamination by infective agents in research
laboratories that use human tissues. J Tissue Culture Methods. 11(4).