Human Aβ1-42 ELISA Kit 免费带检测上海联硕生物科技有限公司

银牌供应商 

技术服务信息

服务名称:Human Aβ1-42 ELISA Kit 免费带检测
服务类别:微生物学服务 - 抑菌作用测试服务
价格:2400元
允许参观:允许参与实验
所在区域:上海.上海
更新时间:2018/5/8 18:51:00
浏览人数:7664
诚信指数:5293点
了解更多:进入公司展台
使用范围:仅限科研使用,不能应用于临床
点此求购 我要咨询
在线QQ: 我是3135923970,请问我有什么可以帮到您呢?
生物在线声明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责。生物在线对此不承担任何保证责任。

供应商联系卡

上海联硕生物科技有限公司
地址:
上海市嘉松中路3555号A1栋
邮编:
201801
电话:
(服务热线:400-0918-500)
传真:
总机转807分机
联系人:
小霞
所在区域:
上海·上海
邮件:
公司展台:
在线QQ:
我是3135923970,请问我有什么可以帮到您呢?
扫一扫,关注我们

技术服务详细描述

1
Human Aβ1-42 ELISA Kit
                
For the quantitative in vitro determination of Aβ1-42
concentrations in Human culture supernates, serum,
plasma and tissue.
TABLE OF CONTENTS
Contents                        Page
TABLE OF CONTENTS................................................................ 2
INTENDED USE ........................................................................... 3
PRINCIPLE................................................................................... 3
WARNINGS AND PRECAUTIONS............................................... 4
MATERIALS PROVIDED WITH THE KIT..................................... 7
MATERIALS REQUIRED BUT NOT PROVIDED......................... 7
STORAGR CONDITIONS............................................................. 8
REAGENT PREPARATION.......................................................... 9
SPECIMEN COLLECTION AND PREPARATION........................ 9
ASSAY PROCEDURE................................................................ 10
CALCULATION OF RESULTS................................................... 12
REFERENCES ........................................................................... 133
INTENDED USE
An enzyme immunoassay quantitative measurement in cell culture in vitro
Human Aβ1-42 supernates, serum, plasma and tissue.
PRINCIPLE
The kit assay Human Aβ1-42 level in the sample,use Purified
Human Aβ1-42 antibody to coat microtiter plate wells, make solid-phase
antibody, then add Aβ1-42 wells, Combined Aβ1-42 antibody which With
HRP labeled , become antibody - antigen - enzyme- antibody complex,
after washing Completely, Add TMB substrate solution,TMB substrate
becomes blue color At HRP enzyme-catalyzed, reaction is terminated by
the addition of a sulphuric acid solution and the color change is measured
spectrophotometrically at a wavelength of 450 nm. The concentration of
Aβ1-42 in the samples is then determined by comparing the O.D. of the
samples to the standard curve.4
WARNINGS AND PRECAUTIONS
 This kit is only for scientific research, and shall not be used as a
clinical diagnosis of use.
 Before starting the assay, read the instructions completely and
carefully. Use the valid version of the package insert provided with the
kit. Be sure that everything is understood.
 The microplate contains snap-off strips. Unused wells must be stored
at 2 °C to 8 °C in the sealed foil pouch and used in the frame provided.
 Pipetting of samples and reagents must be done as quickly as
possible and in the same sequence for each step.
 Use reservoirs only for single reagents. This especially applies to the
substrate reservoirs. Using a reservoir for dispensing a substrate
solution that had previously been used for the conjugate solution may
turn solution colored. Do not pour reagents back into vials as reagent
contamination may occur.
 Mix the contents of the microplate wells thoroughly to ensure good
test results. Do not reuse microwells.
 Do not let wells dry during assay; add reagents immediately after
completing the rinsing steps.
 Allow the reagents to reach room temperature (21-26°C) before
starting the test. Temperature will affect the absorbance readings of 5
the assay. However, values for the patient samples will not be
affected.
 Never pipet by mouth and avoid contact of reagents and specimens
with skin and mucous membranes.
 Do not smoke, eat, drink or apply cosmetics in areas where
specimens or kit reagents are handled.
 Wear disposable latex gloves when handling specimens and reagents.
Microbial contamination of reagents or specimens may give false
results.
 Handling should be done in accordance with the procedures defined
by an appropriate national biohazard safety guideline or regulation.
 Do not use reagents beyond expiry date as shown on the kit labels.
 All indicated volumes have to be performed according to the protocol.
Optimal test results are only obtained when using calibrated pipettes
and microtiterplate readers.
 Do not mix or use components from kits with different lot numbers. It is
advised not to exchange wells of different plates even of the same lot.
The kits may have been shipped or stored under different conditions
and the binding characteristics of the plates may result slightly
different.
 Avoid contact with Stop Solution containing 0.5 M H2SO4. It may
cause skin irritation and burns.6
 Some reagents contain Proclin, BND and/or MIT as preservatives. In
case of contact with eyes or skin, flush immediately with water.
 TMB substrate has an irritant effect on skin and mucosa. In case of
possible contact, wash eyes with an abundant volume of water and
skin with soap and abundant water. Wash contaminated objects
before reusing them. If inhaled, take the person to open air.
 Chemicals and prepared or used reagents have to be treated as
hazardous waste according to the national biohazard safety guideline
or regulation.
 For information on hazardous substances included in the kit please
refer to Material Safety Data Sheets7
MATERIALS PROVIDED WITH THE KIT
Instruction 1
Closure Plate Membrane 2
Microelisa Stripplate 12well×8strips 2-8℃
Standard
0.5ml×1 bottle  0 pg/ml
0.5ml×1 bottle  300 pg/ml
0.5ml×1 bottle  600 pg/ml
0.5ml×1 bottle  1200 pg/ml
0.5ml×1 bottle  2400 pg/ml
0.5ml×1 bottle  4800 pg/ml
2-8℃
Sample Billogical 1ml×1 bottle 2-8℃
Chromogen Solution A 6ml×1 bottle 2-8℃
Chromogen Solution B 6ml×1/ bottle 2-8℃
Stop Solution 6ml×1 bottle 2-8℃
HRP-Conjugate Reagent 6ml×1 bottle 2-8℃
Wash Buffer Concentrate 20ml×1bottle 2-8℃
MATERIALS REQUIRED BUT NOT
PROVIDED
 Microplate reader capable of measuring absorbance at 450 nm.
 Precision pipettes to deliver 2 ml to 1 ml volumes.
 Adjustable 10ml -100ml pipettes for reagent preparation.
 Adjustable 10ml -100ml pipettes for reagent preparation.8
 100 ml and 1 liter graduated cylinders.
 Calibrated adjustable precision pipettes, preferably with
disposable plastic tips. (A manifold multi-channel pipette is
desirable for large assays.)
 Absorbent paper.
 37°C incubator.
 Distilled or deionized water.
 Data analysis and graphing software. Graph paper: linear
(Cartesian),log-log or semi-log, or log-logit as desired.
  Tubes to prepare standard or sample dilutions.
STORAGR CONDITIONS
 When stored at 2 °C to 8 °C unopened reagents will retain
reactivity until expiration date.
 Do not use reagents beyond this date. Opened reagents must be
stored at 2 °C to 8 °C.
 Microtiter wells must be stored at 2 °C to 8 °C. Once the foil bag
has been opened, care should be taken to close it tightly again.
 Opened kits retain activity for 8 weeks if stored as described
above.9
REAGENT PREPARATION
Bring all reagents to room temperature before use
SPECIMEN COLLECTION AND
PREPARATION
Serum-Use a serum separator tube(SST) and allow samples to clot
for 30minutes before centrifugation for 15minutes at approximately
1000 xg.Remove serum and assay immediately or aliquot and store
samples at -20°C or -80°C.
Plasma-Collect plasma using EDTA or heparin as an
anticoagulant.Centrifuge samples for 15 minutes at 1000 x g at
2-8°C within 30minutes of collection. Store samples at -20°C or
-80°C.Avoid repeated freeze-thaw cycles.
Cell culture fluid and other biological fluids-Remove particulates
by centrifugation and assay immediately or aliquot and store
samples at -20°C or -80°C.Avoid repeated freeze-thaw cycles10
ASSAY PROCEDURE
 General Remarks
 All reagents and specimens must be allowed to come to room
temperature before use. All reagents must be mixed without
foaming.
 Once the test has been started, all steps should be completed
without interruption.
 Use new disposal plastic pipette tips for each standard, control or
sample in order to avoid cross contamination.
 Absorbance is a function of the incubation time and temperature.
Before starting the assay, it is recommended that all reagents are
ready, caps removed, all needed wells secured in holder, etc. This
will ensure equal elapsed time for each pipetting step without
interruption.
 As a general rule the enzymatic reaction is linearly proportional to
time and temperature.
 Determine absorption with an ELISA reader at 450 nm against 620
nm as reference. If no reference wavelength is available, read only
at 450nm. If the extinction of the highest standard exceeds the
measurement range of the photometer, absorption must be 11
measured immediately at 405 nm against 620 nm as reference.
 Assay Procedure
1.Add the standard: according to the order on board hole concentration in
50 ul standard product configured.
2. Add samples: a blank hole (blank respectively controlled hole without
samples, affinity, and standard reagents, the rest of the enzyme each
step for the same operation), sample holes. The enzymes standard bag
was board to be added sample, and then 40 u l add meat 10 u l Sample
billogical. And when the Sample billogical and in a sample of enzyme
panels at the bottom of the hole, try not to touch the hole wall, gently
shaking blending.
3. Incubate: After closing plate with Closure plate membrane ,incubate for
30 min at 37℃.  
4.  Configurate liquid: 25 times of Wash Concentrate diluted 25 times
with distilled water and reserve.
5.  washing:Uncover Closure plate membrane, discard  Liquid, dry by
swing, add washing buffer to every well, still for 30s then drain, repeat 5
times, dry by pat.
6.  add enzyme: Add ELISA reagents 50μl to each well, except the blank
well.
7.   incubate:Operation with 3.
8.  washing:Operation with 5.12
9.   color: add color reagent A 50μl and color reagent B 50μl to each well.
Gently mix, incubate for 15 min at  37℃.
10.  Stop the reaction:Add Stop Solution50μl to each well, Stop the
reaction(the blue color change to yellow color Immediately).
11.  assay:take blank well as zero , measure the optical densit (OD) at
450 nm after Adding Stop Solution and within 15min.
CALCULATION OF RESULTS
 Calculate the average absorbance values for each set of standards,
controls and patient samples.
 Construct a standard curve by plotting the mean absorbance obtained
from each standard against its.
 Concentration with absorbance value on the vertical(Y) axis and
concentration on the horizontal (X) axis.
 Using the mean absorbance value for each sample determine the
corresponding concentration from the standard curve.
 Automated method: The results in the IFU have been calculated
automatically using a 4 PL.
 (4 Parameter Logistics) curve fit. 4 Parameter Logistics is the
preferred calculation method. Other data.
 Reduction functions may give slightly different results.13
 The concentration of the samples can be read directly from this
standard curve. Samples with.
 Concentrations higher than that of the highest standard have to be
further diluted. For the calculation of.
 The concentrations this dilution factor has to be taken into account.
REFERENCES
REF  : Cat.-No.: / Kat.-Nr.: / No.- Cat.: / Cat.-No.: / N.º Cat.: / N.–Cat
LOT  : Lot-No.: / Chargen-Bez.: / No. Lot: / Lot-No.: / Lote N.º: / Lotto n.:
   :No. of Tests: / Kitgröße: / Nb. de Tests: / No. de Determ.: / N.º de
Testes: / Quantità dei tests:
  : Keep away from heat or direct sun light. / Vor Hitze und direkter
Sonneneinstrahlung schützen. /
Garder à l’abri de la chaleur et de toute exposition lumineuse. /
Manténgase alejado del calor o la
luz solar directa. / Manter longe do calor ou luz solar directa. / Non
esporre ai raggi solari.
:  Read instructions before use. / Arbeitsanleitung lesen. / Lire la
fiche technique avant emploi. /Lea las instrucciones antes de usar. / Ler
as instruções antes de usar. / Leggere le istruzioni prima dell’uso.14
  : Store at: / Lagern bei: / Stocker à: / Almacene a :/ Armazenar a :/
Conservare a:

生物在线声明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责。生物在线对此不承担任何保证责任。

查看Human Aβ1-42 ELISA Kit 免费带检测 产品的用户还对以下产品感兴趣

  Human Aβ1-42 ELISA Kit 免费带检测   [供应商:上海联硕生物科技有限公司]
  qr   [供应商:杭州景杰生物科技有限公司]

ADVERTISEMENT

找不到您所需的产品,发布求购试试?

标题:*
描述:
姓名:*
Email:*
单位:*
电话:*
地址:*
邮编:
资料: 需要 不需要
报价: 需要 不需要