搅拌器I -实验室常用设备-仪器设备-生物在线
搅拌器I

搅拌器I

商家询价

产品名称： 搅拌器I

英文名称：

产品编号： _TY5611

产品价格： 0

产品产地： 美国

品牌商标： GLASCOL

更新时间： null

使用范围： null

上海易扩仪器有限公司
  • 联系人 :
  • 地址 : 上海市肇嘉浜路
  • 邮编 : 200032
  • 所在区域 : 上海
  • 电话 : 133****6815
  • 传真 : 021-23010002
  • 邮箱 : info@equl.com
进入展台

Stirrers 搅拌器

Wide variety of sizes and horsepower ratings to meet most applications
有各种可选的规格和功率搅拌器, 以满足不同的应用

Feedback circuitry to maintain speed even when viscosity changes
即使黏度改变, 反馈回路可以维持速度的稳定

DC-filtered motors on most models to handle heavier loads and provide greater durability
多数型号中的DC-filtered电机能承受较重的负载并提供较大的耐力

Propellers and paddles for most applications
有各种可选的水平和垂直螺旋桨, 以满足不同的应用

Cord-connected controls for safety and convenience
便携的控制器

Reversible motors
可逆向电机

GT31 STIRRING SYSTEM

The GT31 is an improved version of the standard dual-shaft stirring system that has been a favorite with chemists and lab technicians everywhere. It has a totally enclosed, 1/40 hp, permanent-magnet motor with two output shafts. The armature shaft provides high speeds for mixing light materials, while the geared shaft generates higher torque at slower speeds for stirring more viscous mixtures. Continuously variable speed control.

The GT31 stirring system is furnished complete with motor and mounting bracket, controller, and the following accessories:

099D A210101 - 3-jaw, keyless chuck
099D A210106 - paddle
099D A210107 - propeller
099D A283040 - right angle clamp
Lab stand 099D A130150 is recommended to mount the GT31.

Specifications
Lab bench case: 8"w x 6"d x 3.38"h
Motor bracket: 4.38"w x 4.38"d x 5.5"h, with 8.5" rod
Finish: Foxtip gray and charcoal.

　
Catalog Number Description Input Voltage Max rpm Torque lb-in Torque kg-cm Torque Nm Product Weight (lbs)
099D GT31 Dual-shaft 12:1 gearmotor 120 333/4,000 3.6/.26 4.2/.3 .4/.03 17
099D GT331 Dual-shaft 12:1 gearmotor 240 333/4,000 3.6/.26 4.2/.3 .4/.03 17
　


GT24 STIRRING SYSTEM

The GT24 stirring system offers the user a stirrer with more power than the GT31 and a selection of speed ranges up to 2,500 rpm. This model combines today''s permanent-magnet motor technology with solid state electronics. It features totally enclosed, 1/17 hp, cool, and quiet-running motors with direct-drive and geared options, with continuously variable speed control.
The GT24 stirring system is furnished complete with motor, mounting bracket, controller, and the following accessories:

099D A210106 - paddle
099D A210107 - propeller
099D A210101 - 3-jaw, keyless chuck (with GT24N and GT224N only)
099D A260108 - 3-jaw, keyless chuck and arbor (with GT2406, GT22406, GT2412 and GT22412 only)
100D LC300 - heavy-duty 90° clamp
Lab stand 099D A130150 is recommended to mount the GT24.

Specifications
Lab bench case: 8"w x 6"d x 3.38"h
Motor bracket: 4.38"w x 4.38"d x 7"h, with 8.5" rod
Finish: Foxtip gray and charcoal.

Catalog Number Description Input Voltage Max rpm Torque lb-in Torque kg-cm Torque Nm Product Weight (lbs)
099D GT24N Single-shaft motor, direct drive 120 2500 1.5 1.7 0.17 16
099D GT2406 Single-shaft motor, 6:1 gearmotor 120 417 5.4 6.2 0.60 17
099D GT2412 Single-shaft motor, 12:1 gearmotor 120 208 12.0 13.8 1.32 16
099D GT224N Single-shaft motor, direct drive 240 2500 1.5 1.7 0.17 16
099D GT22406 Single-shaft motor, 6:1 gearmotor 240 417 5.4 6.2 0.60 17
099D GT2412 Single-shaft motor, 12:1 gearmotor 240 208 12.0 13.8 1.32 17

　

无空气干扰的向上流动的搅拌器
NON AERATING/UPWARD FLOW STIRRERS

The upward flow stirrer mixes without introducing air. The unique, continuous-shearing and blending action occurs entirely below the solution''s surface, creating a thorough mixing action without foaming or splashing. Even at high speeds in nearly full containers, there is minimal surface disturbance.

The upward flow stirrer may be used effectively in many procedures. It may be used with pharmaceuticals, cosmetics, paints, inks, petroleum, and foods. It is also useful in stirring hot and cold solutions in small or large volumes. It can provide rapid disbursement or re-suspension of heat-sensitive substances, proteins, oils, or food essences. It also emulsifies liquids of different densities, dissolves low-soluble solids, and resuspends bacteria into solution. Operation in open containers of all sizes is possible.

All wetted parts are made of corrosion-resistant stainless steel, which allows easy cleaning. The self-lubricating Teflon TFE bushing requires no maintenance and adds to the stirrer''s long life. The shielded stirring blades cannot damage the mixing vessel.

To use as a conventional stirrer, the stirring blade and shaft may be used without the outer housing.

How to select the right components for your specific needs:
Use the chart below to find the stirring unit that best fits your stirring needs.
　

The unique flow of the solution created
by the upward flow stirrer allows it to
mixer thoroughly with no foaming,
splashing, or introduction of air.
　
　
Motors for Upward Flow Stirrers
Catalog Number Description Input Voltage RPM Includes Suggested Lab Stand Dimensions Product Weight (lbs)
099D UF12 Motor Drive 120V 11,500 Lab Clamp A130150 4 3/8"w x 13"d x 9 1/2"h 10.0
099D UF24 Motor Drive 240V 11,500 Lab Clamp A130150 4 3/8"w x 13"d x 9 1/2"h 10.0

How to select the right components for your specific needs:
Use the chart below to find the attachment that best fits your stirring needs.
Upward Flow Stirring Unit
　
Catalog Number Mixing Range Specifications Product Weight (lbs)
Aqueous* Viscous*
(Centipoise)
099D 25A Will work in 25 mm test tube, 12 ml minimum solution for non-aeration maximum approx. 1 liter Not advised Diameter 3/4" (19 mm), length 9.5"(241 mm) overall. 0.8
099D 25B 250-8,000 ml Up to 3000 Diameter 1-1/2" (38 mm), length 12" (305mm) overall 1.5

*Results for specific volumes will vary with viscosity.
　

　

Stir-Testers
  • Actual speeds are displayed and maintained by a synthetic tachogenerator. (Speed is kept within less than 1% of the base speed from no-load to more than 100% of full-load regardless of AC line voltage fluctuations of ±10%.)
  • Viscosity measurement is easier thanks to a controller with a digital readout switchable between speed and torque.
    　
  • Data on shear stress, shear rate, velocity gradients, and viscosity is accumulated easily with external DC multi-volt signals for speed and torque (for strip or X-Y recorders) available through an output port on the rear of the control.
    　
  • Operator convenience and safety is increased with cord connections between drive motors and controls to allow control placement away from hostile environments.
HST10 SERIES STIR-TESTER

The HST10 is available in direct-drive or geared models with a totally enclosed, 1/17 hp, permanent-magnet DC motor. Digital readout displays speed in rpm''s and torque in gm-cm (kg-cm for geared motors). Front panel switch toggles between speed and torque. The HST10 includes a reversible drive motor with mounting bracket, controller, and the following accessories:

099D A210101 3-jaw, keyless chuck and arbor (with HST10N and HST210N only)
099D A260108 3-jaw, keyless chuck and arbor (for HST10 geared motors)
099D A210106 paddle
099D A210107 propeller
100D LC300 heavy-duty 90° clamp
Lab stand 099D A130150 is recommended to mount the HST10.

Specifications
Lab bench case: 8"w x 8"d x 4.75"h
Motor bracket: 4.38"w x 4.38"d x 7"h, with 8" rod
Finish: Foxtip gray and charcoal.

　
Catalog Number Description Input Voltage Max rpm Torque lb-in Torque kg-cm Torque Nm Product Weight (lbs)
099D HST10N Direct drive, rpm/torque readout & X-Y output 120 2500 1.5 1.73 0.17 14
099D HST1006 Similar to HST10N but with 6:1 gearmotor 120 417 5.4 6.22 0.60 15
099D HST1012 Similar to HST10N but with 12:1 gearmotor 120 208 12.0 13.80 1.32 15
099D HST210N Direct drive, rpm/torque readout & X-Y output 240 2500 1.5 1.73 0.17 14
099D HST21006 Similar to HST210N but with 6:1 gearmotor 240 417 5.4 6.22 0.60 15
099D HST21012 Similar to HST210N but with 12:1 gearmotor 240 208 12.0 13.80 1.32 15
　


HST20 SERIES STIR-TESTER

The HST20 lets you maintain stirring speed with a 1/8 hp, totally enclosed, permanent-magnet DC motor. Digital readout displays speed in rpm''s and torque in oz-in. Front panel switch toggles between speed and torque. The HST20 a reversible drive motor with mounting bracket, controller, and the following accessories:

099D A260100 - 3-jaw, keyless chuck and arbor (HST20N & HST220N only)
099D A260106 - propeller
100D LC300 - heavy-duty 90° clamp
099D A260200 - 3-jaw, keyless chuck and arbor (for HST20 geared motors).
Lab stand 099D A130150 is recommended to mount the HST20.

Specifications
Lab bench case: 8"w x 8"d x 4.75"h
Motor bracket: 4.5"w x 4.5"d x 9.5"h, with 8.5" rod
Finish: Foxtip gray and charcoal.

Catalog Number Description Input Voltage Max rpm Torque lb-in Torque kg-cm Torque Nm Product Weight (lbs)
099D HST20N Direct drive, rpm/torque readout & X-Y output 120 2500 3.1 3.57 0.34 16
099D HST2004 Similar to HST20N but with 4:1 gearmotor 120 660 6.0 6.90 0.66 20
099D HST20 Similar to HST20N but with 9:1 gearmotor 120 266 21.0 24.20 2.31 20
099D HST2021 Similar to HST20N but with 20:1 gearmotor 120 125 46.0 53.00 5.06 20
099D HST2044 Similar to HST20N but with 44:1 gearmotor 120 57 96.0 111.00 10.56 20
099D HST220N Direct drive, rpm/torque readout & X-Y output 240 2500 3.1 3.57 0.34 16
099D HST22004 Similar to HST220N but with 4:1 gearmotor 240 660 6.0 6.90 0.66 20
099D HST220 Similar to HST220N but with 9:1 gearmotor 240 266 21.0 24.20 2.31 20
099D HST22021 Similar to HST220N but with 20:1 gearmotor 240 125 46.0 53.00 5.06 20
099D HST22044 Similar to HST220N but with 44:1 gearmotor 240 57 96.0 111.00 10.56 20
　


HST30 SERIES STIR-TESTER

This model provides more power for heavy-duty applications with a 1/4 hp, totally enclosed, permanent-magnet DC motor. Digital readout displays speed in rpm''s and torque in oz-in. Front panel switch toggles between speed and torque. The HST30 includes a reversible drive motor with mounting bracket, controller, and the following accessories:
099D A260108 - 3-jaw, keyless chuck and arbor for HST30N and HST230N only
099D A260275 - 3-jaw, keyless chuck and arbor (for HST30 geared motors)
099D A260106 - propeller
100D LC300 - heavy-duty 90° clamp
Lab stand 099D A130150 is recommended to mount the HST30.

Specifications
Lab bench case: 8"w x 8"d x 4.75"h
Motor bracket: 5"w x 5.5"d x 10"h, with 8.5" rod
Finish: Foxtip gray and charcoal.
Catalog Number Description Input Voltage Max rpm Torque lb-in Torque kg-cm Torque Nm Product Weight (lbs)
099D HST30N Direct drive, rpm/torque readout & X-Y output 120 2500 6.3 7.3 0.70 20
099D HST3005 Similar to HST30N but with 5:1 gearmotor 120 500 25.0 28.8 2.75 24
099D HST3010 Similar to HST30N but with 10:1 gearmotor 120 250 45.0 51.8 4.95 24
099D HST3020 Similar to HST30N but with 20:1 gearmotor 120 125 90.0 103.7 9.90 24
099D HST230N Direct drive, rpm/torque readout & X-Y output 240 2500 6.3 7.3 0.70 20
099D HST23005 Similar to HST230N but with 5:1 gearmotor 240 500 25.0 28.8 2.75 24
099D HST23010 Similar to HST230N but with 10:1 gearmotor 240 250 450 51.8 4.95 24
099D HST23020 Similar to HST230N but with 20:1 gearmotor 240 125 900 103.7 9.90 24