乐畅奇KDS 410P可编程高压注射泵
Programmable High Pressure Pump
Higher Force Pump for Demanding Applications
此款注射泵针对高压需求
The new KDS 410 is a high pressure syringe pump which more than doubles the linear force available on the KDS 200 series. This extra force makes the pump ideal for delivery of fluid to reactors in chemical applications or for working with viscous fluids. The robust design of the syringe holder ensures the syringe is kept level during delivery of the fluid. It features two different types of clamping mechanisms, for both smaller and larger syringes. When the application demands a more rugged pump, select the KDS 410. The KDS 410 features two modes of operation a dispense and a withdrawal mode. It is easy to set up and use in 2 quick steps; select the type of syringe and the flow rate. The selectable flow rate is entered directly into the program and stored in memory. A volume can also be set to dispense a known amount and then shut off.
新款KDS410是高压注射泵，线性压力为普通KDS200系列的两倍以上。这种高压用于在化学反应中向反应器输送流体或处理粘性流体非常理想。注射器夹具的坚固设计，保证了注射器在注射过程中以稳定的速率来输送流体。有两种不同机械结构的夹具，大小注射器都适用。若需要高压的注射泵，那么KDS410就是最好的选择。KDS410有注射和抽取两种模式。依照简单二步，就可快速设置使用，选择注射器类型，设置流速。流速直接输入程序并存储。注射量也可设置，注射到达设置量时会自动停止。

Features特点:
 Quick set up and installation
设置快速，安装简便
 High pressure syringe clamps
高压注射器夹具
 Typical Accuracy 1% or better
精度1%以上
 > 100 lbs linear force
>100 lbs的线性压力
 Wide variety of syringes from 10 µl to 140 ml
注射器尺寸广泛，10 µl到140 ml
 Wide plunger travel
柱塞行程宽
 Quick fluid filling
注射液体填充快速
 Power reduction mode
节电模式
 Volume dispense
显示已注射量
 Minimum flow rate of 0.001 µl/hr (10 µl syringe)
最小注射速率0.001 µl/hr（用10µl注射器）
 Maximum flow rate of 145.5 ml/min (140 ml syringe)
最大注射速率145.5 ml/min（用140ml注射器）
 Power failure indication
电源故障指示
 Anti-siphon
防虹吸
 TTL interface for remote activation
TTL接口，可进行远程激活
 RS-232
RS-232接口
 Daisy chain up to 99 pumps together
可串联99台泵一起工作
 Applications
应用
 Continuous delivery of fluid
持续注射液体
 Pilot plant reactor dosing
反应堆注射
 Dispensing viscous fluids
注射粘性液体
 Multi-step keypad programmable feature (KDS410P)
可编程功能